3M™ Sound Reduction Mat, 19 11/16 inches x 19 11/16 inches, 38500

3M™ Sound Reduction Mat, 19 11/16 inches x 19 11/16 inches, 38500

3M™ Sound Reduction Mat, 19 11/16 inches x 19 11/16 inches, 38500

  • Stock Number: 60455068852
  • UPC: 00051131385009
Details

The 3M™ Sound Reduction Mat is a self-adhesive, conformable mat used to suppress noise and vibration in your vehicle.

 

Self-adhesive, conformable mat that reduces road noise and vibration

 

3M™ Sound Reduction Mat can be used to suppress road noise, sound system vibrations, rattles, and more. Easily custom cut and apply to vehicle floor pans, engine compartments, hoods, deck lids, inside doors, and on body panels.

 

In addition, if you need to replace factory installed sound deadening pads, this is a great option. Road tested to the high standards of the European market, this mat fits easily around a variety of stamped shapes and has a center perforation for easy door panel installation.

Additional Information
3M Part Number 38500
UPC 00051131385009
Case Quantity 4 per case
Case Inner Pack 1 pad

 
Click to Chat
  • Self-adhesive, conformable mat used to suppress noise and vibration in your vehicle
  • Quiets noise around trunks, door panels, hoods, floor pans, etc.
  • No special tools required
  • Great for road noise, sound system vibrations, and rattles

 

Where should I use the 3M™ Sound Reduction Mat?

The mat can be used in a variety of places, some of the most common areas are:

  • Trunk
  • Door Panel
  • Speaker Installation

 

Trunk

Suggested Amount of Material: 2 Mats

Estimated Time: 30 Minutes

 

Door Panel

Suggested Amount of Material: 1/2 - 1 Mat per door

Estimated Time: 15 minutes per door

 

Speaker Installation

Suggested Amount of Material: 1/4 Mat

Estimated Time: 30 Minutes

 

 

 

1)     Prepare area by removing any carpeting, lining and/or panels to expose metal substrate.

 

sound reduction mat 3M

sound reduction mat 3M

 

 

2)     Clean the surface with rubbing alcohol and let dry. Ensure surface is free of oil, dust, and debris.

3)     Using standard household scissors cut the 3M™ Sound Reduction Mat to fit the size of the desired area.

 

sound reduction mat 3M

 

4)     Peel and discard the yellow liner off the back of the mat.

 

sound reduction mat 3M

 

5)     Using even pressure, carefully conform and firmly apply to the surface. If additional conformity is needed, use a heat gun or blow dryer to heat the mat.

6)     Return panels, carpeting or lining to their original position.

 

sound reduction mat 3M

sound reduction mat 3M

sound reduction mat 3M

sound reduction mat 3M

sound reduction mat 3M

sound reduction mat 3M

No reviews are added for this product.