3M™ Performance Soft Sanding Sponge, 320-400 grit, 03088

3M™ Performance Soft Sanding Sponge, 320-400 grit, 03088
3M Performance Soft Sanding Sponge 03088 is a 2.75 x 5.5 inch sponge that's less than one half inch thick. With a blend of mineral sizes, they deliver the same cutting power as 320 to 400 grit sandpaper.

These extra fine grits are used for sanding putty, glaze and primer. 3M™ Performance Soft Sanding Sponges get into tight, hard-to-reach, spots that require sanding during auto body finishing repairs and touch ups.
Additional Information
3M Part Number 03088
UPC 51131030886
Case Quantity 1
Case Inner Pack 2 sponges per pack
Width 2 3/4 inches
Length 5 1/2 inches
Performance Level Best
Backing Foam
Grade Assorted
Product Form Sponge
Abrasive Mineral Silicon Carbide
Sanding Method Hand
Wet or Dry Wet or Dry
Size 2 3/4 x 5 1/2 inches
Designed as a better surface finishing solution, each sponge combines quality 3M abrasives with a highly flexible foam backing -- creating a flexible way to uniformly sand curved areas such as bumpers, complex body lines, headlight openings, door handles, door jambs, and more.

These specialty-purpose sponges will reach challenging locations that ordinary sanding tools simply cannot reach. They are recommended for use in sanding both clear coat and paint.

The soft foam backing helps to evenly distribute pressure points during hand sanding, creating a smooth and consistent finish. For added versatility, they can be used for either wet or dry sanding. Offering exceptional convenience, 3M™ Performance Soft Sanding Sponges are ready to use straight from the package without any special tools, supplies or conditioning prior to use.

Use during Stage 3 and 4 as part of the 3M™ Body Repair System

About the 3M Body Repair System

The 3M Body Repair System connects two great brands and demonstrates how 3M & Bondo® branded products work together to achieve an excellent body repair. The four-stage process highlights the different steps for repairing everything from a paint scratch to a small dent to a patch of rustred out metal.

The stages explain how products from different categories – such as abrasives, tapes, body filler and tools – work together during each stage of a repair.
Stage 1 products are for removal of material in damaged areas in preparation for treatments and repair. These products help mask the area and remove paint and rust. Stage 2 products are for removing dents, treating and repairing rust, reinforcing holes in preparation for filler application, pulling dents patching holes and making small repairs.

Stage 3 products are for applying body filler, feathering, sanding, and re-applying. These products are for preparing the surface for primer. Stage 4 products are for the final step -- sealing with primer, paint and polish.

No reviews are added for this product.